0TEH 2018

8th International Scientific Conference on Defensive Technologies

       

 

REPUBLIC OF SERBIA

MINISTRY OF DEFENCE

www.mod.gov.rs

 

MINISTRY OF DEFENCE

Material Resources Sector

Defensive Technologies Department

Military Technical Institute

www.vti.mod.gov.rs

 

Improvement of experimental method for detonation velocity determination

 

Uroš Anđelić

Military Technical Institute, Belgrade, uroshcs@gmail.com

DANICA SIMIĆ

Military Technical Institute, Belgrade, simic_danica@yahoo.com

SLAVICA Terzić

Military Technical Institute, Belgrade, slavica@alogodesk.com

Ivan dimitrijević

Military Technical Institute, Belgrade, ivandimitrijevic2801@gmail.com

zoran borković

Military Technical Institute, Belgrade, e-mail

 

Abstract: This paper presents an improvement of existing method for detonation velocity measurement developed in the Military Technical Institute. Detonation velocities of a cast and a pressed explosive were measured with existing and improved method. The old method for detonation velocity measurement with electric probes and the new method with optic probes and photo-detector for detonation velocity measurement were tested on the two explosive compositions: pressed explosive FH-5 and cast explosive HMX/HTPB 80/20. Results of measurements were compared. Average detonation velocity values, measurement absolute deviation values and standard deviation values for tested cast and pressed explosives are presented and analyzed.

Keywords: detonation velocity, PBX explosive, electric probes, optic probes, photo-detector.

Copyright © OTEH 2012. All rights reserved.  _  oteh@vti.vs.rs
Military Technical Institute,
Ratka Resanovica 1, Belgrade, Serbia