0TEH 2016

7th International Scientific Conference on Defensive Technologies

       

 

REPUBLIC OF SERBIA

MINISTRY OF DEFENCE

www.mod.gov.rs

 

MINISTRY OF DEFENCE

Material Resources Sector

Defensive Technologies Department

Military Technical Institute

www.vti.mod.gov.rs

 

NUMERICAL CALCULATION OF J-INTEGRAL USING FINITE ELEMENTS METHOD

 

BAHRUDIN HRNJICA

University of Bihać – Faculty of Technical Engineering Bihać, Bihać, bahrudin.hrnjica@unbi.ba

fadil islamović

University of Bihać – Faculty of Technical Engineering Bihać, Bihać, f.islam@bih.net.ba

dženana gačo

University of Bihać – Faculty of Technical Engineering Bihać, Bihać, dzgaco@bih.net.ba

ESAD BAJRAMOVIĆ

University of Bihać – Faculty of Technical Engineering Bihać, Bihać, bajramovic_e@yahoo.com

 

Abstract: This paper presents the procedures and results of numerical determination of fracture mechanics parameters in condition of elastic-plastic fracture mechanics. The finite element analyses were performed on standard Single-edge notched bend, SENB, specimen of structural steel. Discretization was performed on three specimens with different crack lengths. The results of numerical analysis were compared with the experimental results, in order to evaluate numerical models. The results of analysis show good approximation of numerically determined J integral compared with experimental results.

Keywords: fracture mechanics, J integral, finite elements method, numerical integration, SENB specimen.

 

Copyright © OTEH 2016. All rights reserved.  _  oteh@vti.vs.rs
Military Technical Institute,
Ratka Resanovica 1, Belgrade, Serbia